ESI IVX X-Class User's Guide download pdf (Page 11)

IVX X-Class Administrator’s Manual Administrator programming: An introduction

A.7

Remote setting of day, night, holiday and auto modes

Normally, the system’s day/night mode operation will be manually controlled at an ESI Feature Phone

and/or set to follow the day/night mode tables (programmed by the Installer) automatically. In addition,

the Administrator can remotely change the mode and/or re-record the holiday greeting to handle unex-

pected closings such as for inclement weather.

Remotely logging into the system with the Administrator password lets the caller re-record the ID 1

greetings (day, night, day2 and night2) and the holiday greeting, as well as change the mode to

day/night/holiday/day2/night2 (or auto).

1. At the main greeting, enter



4 5 6 # — or



[the new password] # — to enter remote

programming mode.

2. You’ll hear prompts that will allow you to change the answer mode (day, night, day2, night2, holiday

or auto) and/or to re-record the holiday greeting and the main greeting (ID 1). Follow the prompts to

perform the desired operation.

3. Exit by pressing



and hanging up.

Prompts for remote settings: an outline

1 Set answer mode

1 Day mode

2 Night mode

3 Holiday mode

4 Use day/night table*

5 Day2 mode

6 Night2 mode

2 Record holiday main greeting

3 Record daytime main greeting

4 Record nighttime main greeting

5 Record day2 main greeting

6 Record night2 main greeting

Note: If the system is answered live and call is then routed to a mailbox., the Administrator can press 8 to

return to the main greeting and then follow the steps for making remote settings.

* This is used if the Installer has programmed an automatic calendar.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

No comments

ESI IVX X-Class User's Guide Page 11