ESI IVX 128 Installation Manual download pdf (Page 19)

IVX 128 Plus: additional features

F831: Local location number

Before programming Esi-Link parameters for other locations in Function 832, you must program the

location number of the local IP PBX. Each IP PBX in an Esi-Link network must have a unique location

number. Valid location numbers are in the range of 700–799. This location number will be used for

dialing between sites. Press # to confirm.

LOCAL LOC NUMBER

F832: Adding an Esi-Link location

This function is used to add, modify or view the programming for an Esi-Link location. Add the location

for the site to be added or modified. The valid range is 700–799. This number must be unique for each

site. Press # to confirm.

ESI-LINK LOC

NUMBER? _

Enter the location name, which can be up to 10 characters in length. Press # to confirm.

701 LOC NAME

Enter the three-character location abbreviation. Press # to confirm.

701 LOC ABBRV

Enter the MAC address of the location’s IP PBX. (This can be displayed in Function 821 programming on

the IP PBX at that location. ) This MAC address is different than the one displayed in Function 821 on

the local IP PBX. Press # to confirm.

701 HOU MAC

00304DFFF123

Note: All ESI MAC addresses begin with 00304D followed by six alphanumeric characters.

Enter the remote-access IP address for the location’s IP PBX. This is the public IP address or private

WAN address used for remote access to the location’s IP PBX. Enter the address in dotted-quad

notation, using the # key as the dot between the octets. Press # again when finished.

701 HOU RMT IP

Enter the UDP port number assigned to the location’s IP PBX. Press # to confirm (and complete the

Function 832 entries).

701 HOU PBX UDP

__001

1 2 ... 14 15 16 17 18 19 20

No comments

ESI IVX 128 Installation Manual Page 19