ESI C-Plus Installation Manual download pdf (Page 21)

ESI-50L Hardware Installation Manual External connections

G.6

60-Key Expansion Console connection

Notes: The 60-Key Expansion Console can be connected to only a 48-Key Feature Phone.

If connecting both a 60-Key Expansion Console and a 60-Key Second Expansion Console to a 48-Key

Feature Phone, see “60-Key Second Expansion Console connection,” page G.7.

1. The 60-Key Expansion Console (right) includes an expansion cable.

Connect one end of the expansion cable to the appropriate connector

on the bottom of the Feature Phone (below). Then, connect the other end

of the expansion cable to the 60-Key Expansion Console.

2. To keep cabling out of the way, thread the expansion cable into the

slots on the bottom of the phone and 60-Key Expansion Console.

3. Program the keys on the 60-Key Expansion Console using the same

procedure as with the Digital Feature Phone (press PROGRAM 2).

4. If necessary, remove the clear plastic overlay from the keys on the

Expansion Console.

5. For the customer’s convenience, label the paper overlay to show how

the keys are programmed (we suggest you use ESI System Programmer

for this).

6. Install the labeled paper overlay on the 60-Key Expansion Console.

7. Install the clear plastic overlay over the paper overlay, to protect it.

8. Use the provided Velcro

tape to attach the left side of the 60-Key Expansion Console to the right side of

the 48-Key Feature Phone.

Connectors on bottom of 48-Key DIgital Feature Phone

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27

No comments

ESI C-Plus Installation Manual Page 21