ESI MaXiO series Specifications download pdf (Page 3)

MaXiO XD EX8000

2. Description of EX8000

2.1 Front Channel Section

Analog Balanced XLR / TRS (Combo) Input Connector

EX8000 provides 8 combo connectors (XLR and 1/4" TRS) on

the front panel that are used as balanced analog inputs for line

level signals and microphone connection (via XLR).

Microphone Input Selection Switch

Every input channel can be used for line level or microphone

signals. When this switch is enabled, a microphone can be

connected via XLR. In this case phantom power is supplied

(when enabled, check no. 7). When the switch is not enabled, the

XLR and TRS inputs are used for balanced line level signals.

Input Gain Control

Controls the amount gain applied to the input signal from the

XLR or TRS connector of specific channel. Microphone signals

can be amplified with 48dB maximum, line level signals with up

to 30dB.

Analog Input / Output Level Meter

The two level meters indicate the signal level for the analog inputs and outputs. The level meter

on the left shows the input signal; the level meter on the right shows the output signal of the

corresponding channel. A range from 0dB to 60dB in 10 dB-steps is displayed.

1 2 3 4 5 6 7 8 ... 14 15

No comments

ESI MaXiO series Specifications Page 3