ESI MaXiO series Specifications download pdf (Page 2)

MaXiO XD EX8000

1. Introduction

Thank you for choosing the ESI EX8000, part of the MaXiO XD system.

EX8000 is a high performance 24-bit, 192 kHz AD/DA converter that features 8 balanced inputs

with microphone preamps, XLR/TRS combo connectors and 10 step LED metering lights for each

input channel. EX8000 also provides 8 analog output channels, multi-channel AES/EBU and

S/PDIF digital I/O, ADAT I/O and a headphone output for monitoring.

You can use EX8000 either as a very powerful standalone device or in combination with the

MaXiO PCI host card as a high-end multi-channel recording solution for the PC.

1.1 Key Features

· E.D.I Connector

· high-end quality 24-bit / 192 kHz ADC with 123dB(a) dynamic range

· high-end quality 24-bit / 192 kHz DAC with 120dB(a) dynamic range

· 8 balanced analog inputs with combo (XLR / TRS) connectors

· high precision & ultra low noise 'XD-PRE' microphone preamplifier (-135.5dBu) on each analog

input channel with support for +48V phantom power

· Mic/Line selection switch and gain control for each analog input channel

· 8 inserts (one for each analog input channel) with 1/4" connectors

· 8 balanced analog outputs with XLR connectors (+4dBu)

· 8 balanced/unbalanced analog outputs with TRS connectors (-10dBV)

· headphone amplifier with volume control

· 8 channel digital I/O in AES/EBU (XLR connectors) and coaxial S/PDIF (RCA connectors)

format, supporting up to 24-bit / 192 kHz

· 8 channel ADAT optical digital I/O with S/MUX support

· 10 step LED level meters on front panel for all channels (input and output)

· supported sample rates: 44.1, 48, 88.2, 96, 176.4 and 192 kHz

· Word Clock Input: Fs / 256*Fs (via BNC connector)

1.2 Safety Instructions

Caution: To reduce the risk of electrical shock, do not remove the cover of this unit. Please refer

servicing to qualified personnel only.

Warning: Do not expose this unit to rain or moisture.

Retain Instructions: Please retain all safety and operating instructions for future reference.

Heat: The unit should be placed away from other heat sources such as heaters, radiators, ovens or

other studio equipment such as power amplifiers that produce heat.

Periods of inactivity: The power cord of the unit should be unplugged from the outlet when left

unused for a long period of time.

1 2 3 4 5 6 7 ... 14 15

No comments

ESI MaXiO series Specifications Page 2