ESI MAYA44 XTe User's Guide download pdf (Page 11)

ESI MAYA44 XTe

The tip of the stereo TRS connector is connected with the tip of the left TS connector. The ring of

the stereo TRS connector is connected with the tip of the right TS connector. The sleeve is

connected with sleeve / ground of both channel connectors.

The same type of cables are typically used as so-called ‘insert-cables’ to connect effects units to

many mixing consoles. This information might help you when you want to make or purchase such a

cable.

5.2 Connection Examples

Line Inputs

MAYA44 XTe has two stereo line inputs (INPUT

1/2 and INPUT 3/4) that can be connected to any

device with regular unbalanced -10dBv line

output such as the output of a mixing console, a

CD or MD player, a sound module, a keyboard

with sound engine, a synthesizer or others.

Instrument and Microphone Inputs

MAYA44 XTe has a built in professional microphone

preamp with +48V phantom power support. You can

connect a dynamic microphone as well as a condenser

microphone to the top input. INPUT 1/2 has to be

switched to accept microphone signals in the Control

Panel (see chapter 6 of this manual). If you use a

condenser microphone, you need to enable +48V in

the Control Panel as well. Please make sure to use a

fully balanced XLR to TRS microphone cable.

In addition, MAYA44 XTe has a Hi-Z instrument

input that can be used for a direct connection to an

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

ESI MAYA44 XTe User's Guide Page 11