ESI KeyControl 25 XL User's Guide download pdf (Page 8)

KeyControl 25 XL ESI

4.4 Bank Select MSB/LSB

The LSB/MSB bank value can be changed by pressing the EDIT button to enter the edit mode,

which will be indicated by the LED next to it and then pressing the BANK MSB or BANK LSB

key. After that, input the bank number with the numeric keys and press ENTER to confirm.

4.5 Transpose

Hold EDIT and use the data up and down buttons to adjust transpose. Adjustment range is +/- 12

semitones. Hold EDIT and both data up and down at the same time to set transpose to initial 0.

4.6 Octave

By default, the data up and down buttons are assigned to preset #154 – octave. Press both data

up and down at the same time to set octave to initial 0.

4.7 Dual

Press EDIT button to enter the edit mode, which will be indicated by the LED next to it, and then

press the DUAL key to enable / disable the dual function in which two notes can be sent out

simultaneously.

4.8 MTC

Press EDIT button to enter the edit mode, which will be indicated by the LED next to it, and then

press the MTC key to enable / disable the sending of MTC messages.

4.9 Mute

Press EDIT button to enter the edit mode, which will be indicated by the LED next to it, and then

press the MUTE key to enable / disable the mute function. If enabled, no messages will be

transmitted.

4.10 Snapshot

Press EDIT button to enter the edit mode, which will be indicated by the LED next to it, and then

press the SNAPSHOT key to transmit the values of all controls (R1~R8, sliders, wheels, …) at

one time.

4.11 Upload & Download

KeyControl 25 XL can send and receive all configuration data in form of SysEx strings. To make

use of that, a SysEx-compatible sequencing software like Cubase. Make sure in MIDI filter settings

in your software that SysEx data is not filtered out.

To transfer the data from the keyboard to your computer, start recording in your software. Then

press the EDIT button to enter the edit mode, which will be indicated by the LED next to it, and

after that press UPLOAD to transmit the data at one time.

To transfer the data back from the computer to KeyControl 25 XL, make sure that the data is ready

for transfer in your software. Press the EDIT button to enter the edit mode, which will be indicated

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

ESI KeyControl 25 XL User's Guide Page 8