ESI DuaFire User's Guide download pdf (Page 6)

DuaFire ESI

Power Switch: the power switch has three positions. If the switch is in the middle position (OFF),

DuaFire is turned off. If the switch is set to BUS., DuaFire will take its power from the computer

(bus powered operation). This requires a 6-pin to 6-pin FireWire cable. If the switch is set to EXT.,

DuaFire gets powered by an external power supply connected to the DC IN port.

Output 1 / 2: the first output pair is provided with 1/4" TRS connectors. Use these line outputs to

connect DuaFire to your mixing desk, monitoring speakers or other studio equipment.

Output 3 / 4: the second output pair is provided with RCA connectors. Use these unbalanced line

outputs to connect DuaFire to other studio or HiFi equipment.

Line / Phono Switch: the LINE / PHONO switch allows you to switch between line level and

phono level inputs.

Inputs 1 / 2: In addition to the XLR and 1/4" connectors on the front panel, DuaFire also provides

RCA inputs for phono signals on the back panel. Please note that these inputs cannot be used

simultaneously as the inputs on the front panel. To use the phono inputs, the LINE / PHONO

switch must be set to phono.

Ground Connector: if you are using the phono inputs and have them directly connected to a turn

table, please connect this ground connector to ground to avoid humming.

2.3 Minimum System Requirements

- Intel Pentium III 600MHz CPU or equivalent AMD CPU

- one available FireWire 400 port

- at least 512 MB RAM

- at least 1 GB available space on HDD

- DVD-ROM drive (for Cubase LE 4 installation)

- internet connection (for Cubase LE 4 activation)

- Windows XP (with Service Pack 2) 32-bit or Windows Vista 32-bit

Mac

- Power Macintosh G4 or higher

- one available FireWire 400 port

- at least 512 MB RAM

- at least 1 GB available space on HDD

- DVD-ROM drive (for Cubase LE 4 installation)

- internet connection (for Cubase LE 4 activation)

- Mac OS X 10.3 or higher

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

ESI DuaFire User's Guide Page 6