ESI Miditerminal M4U Specifications download pdf (Page 6)

ESI Miditerminal M4U

If you want go back to the Normal mode, always push to pull out the button.

2) THRU Mode 1: Input and Output ports will be matched by 1:1.

For example, MIDI data from Input 2 directly goes to Output 2.

All LED display will be turned on. After 2~3 seconds, LED will be turned off again.

Power/THRU LED will become green color.

3) THRU Mode 2: The MIDI data from Input 4 goes to Output 1~4.

LED Display Input 4 and Output 1~4 would be turned on.

After 2~3 seconds, Output 1~4 will turned off. ( Input 4 is remains to be turned on)

Output LED will be lit by signal.

Power/THRU LED will become green color.

4) THRU Mode 3: The MIDI data from Input 1 goes to Output 1~4.

LED Display Input 1 and Output 1~4 would be turned on.

After 2~3 seconds, Output 1~4 will be turned off.( Input 1 is remain to be turned

on)

Output LED will be light by signal.

In addition, Power/THRU LED will become green color.

* Three kinds of THRU modes are changed in sequence whenever the button is

pushed in.

Function LED signal display

Normal

Basic MIDI interface

THRU 1

I/O port matching (1:1)

All LED display will be turned on

After 2~3 seconds, LED will be turn off again

Flickering according to the signal

THRU 2

In 4 -> All MIDI Outputs

In 4, Out 1~4 display will be turned on

After 2~3 seconds, Out 1~4 LED will be turn

off again (In 4 will be remains to be turned on)

Flickering according to the signal

THRU 3

In 1 -> All MIDI Outputs In 1, Out 1~4 display will be turned on

After 2~3 seconds, Out 1~4 LED will be turn

off again (In 1 will be remains to be turned on)

Flickering according to the signal

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

No comments

ESI Miditerminal M4U Specifications Page 6