Esi aktiv 05 Rev.A User Manual download pdf (Page 9)

ESI aktiv 05

3. vent port – aktiv 05 is a vented box speaker system with a vent port on the rear panel. Make sure

you are not blocking the vent port (i.e. by putting the speaker too close to a wall) or the sound

colour will be changed.

4. volume control knob – use the volume control knob to set the proper input level from the sound

source. Make sure to setup all speakers accordingly. When set to the center position, the output

level is set to the recommended calibrated level to reach the most optimised dynamic response

(expecting a balanced XLR +4dBu or unbalanced TS -10dBV input signal).

5. power switch – when you push the power switch, aktiv 05 will be turned on, and –surprise– it

will be turned off when you push the power switch again.

6. power port with ext. fuse – use this connector to plug in the detachable 3-circuit line cord that

connects to the power outlet. The connector contains a replaceable fuse (T1AL250V).

7. AC Selection – you can select either 115V or 230V AC power according to your local

requirements. Make sure this is selected properly before you switch on aktiv 05 for the first time or

your equipment could be damaged.

5. General Information

Trademarks

ESI, aktiv and aktiv 05 are trademarks of ESI Audiotechnik GmbH. Other product and brand names

are trademarks or registered trademarks of their respective companies.

Correspondence

For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at

www.esi-audio.com

Disclaimer

All features and specifications subject to change without notice.

Parts of this manual are continually being updated. Please check our web site www.esi-audio.com

occasionally for the most recent update information.

1 2 3 4 5 6 7 8 9 10

No comments

Esi aktiv 05 Rev.A User Manual Page 9