ESI nEar05 classic User's Guide download pdf (Page 7)

ESI nEar08 classic

Rear Panel

1. XLR input – this connector accepts balanced XLR input connections. The XLR input is wired

like this:

INPUT SIGNAL XLR CONNECTIONS

+ PIN 2

- PIN 3

Shield PIN 1

2. TRS input – this jack accepts TRS input connections, either balanced or unbalanced. For

balanced connections, a 3-conductor TRS plug is necessary. The TRS input is wired like this:

INPUT SIGNAL TRS CONNECTIONS

+ Tip

- Ring

Shield Sleeve

Unbalanced wiring works with either a 2- or 3-conductor TRS connector. A 2-conductor TRS plug

(or sometimes also just called TS plug) automatically grounds the minus signal input, whereas a 3-

conductor TRS plug wired unbalanced provides the option of leaving the minus open or grounded.

We recommend that you ground the unused input.

3. serial number – this label contains the product serial number.

4. vent port –nEar08 classic is a vented box speaker system with a vent port on the rear panel.

Make sure you are not blocking the vent port (i.e. by putting the speaker too close to a wall) or the

sound colour will be changed.

1 2 3 4 5 6 7 8 9 10

No comments

ESI nEar05 classic User's Guide Page 7